Archief Producten | Topguard

Multi-zone electronic processing board

dennis — Wed, 11 Sep 2019 10:00:13 +0000

Multi-zone processing board to manage all detectors. It processes the signals coming from the detectors and generates alarm states by discriminating them by type of attack: shock (low shocks), breakthrough (gross attacks), drilling (continuous shocks). The processing board is provided with 4 channels: each channel accepts up to 2 sensors of the same type, for a total amount of 8 sensors. 10 solid state NC outputs are available for the connection of the system to a control panel. To enter the configuration and calibration functions of the processing board, you need the DG-DEA-WF Wi-Fi dongle (see page 16) and the relevant service app for mobile devices (Android and iOS).

Dimensions: 130 x 104 x 32 mm (W x H x
Packaging dimensions: 130 x 105 x 40 mm (W x H x D)
Gross weight: 150 g
Power supply: 12 Vdc (+/- 25%)
Current: 250 mA (max – during calibration) 100 mA (standby)
Operating temperature: -25 °C ÷ +70 °C
Inputs: – 4 inputs for A03PRO sensors (2 non polarized conductors + shield for each channel) – 4 RESET inputs (one per channel)
NC relay outputs: – 4 Burglar/Breakthrough alarm outputs (one per channel) – 4 Opening alarm outputs (one per channel) – General tamper – Low battery • Communication port: Wi-Fi Dongle (RJ12)
Management capability: 8 SERIE A03PRO sensors (2 each channel)
Mobile app licence (iOS/ANDROID) included

Het bericht Multi-zone electronic processing board verscheen eerst op Topguard.

Detector for walls

dennis — Wed, 11 Sep 2019 09:53:42 +0000

Piezodynamic shock sensor for the protection of walls against breakthrough and drilling. On masonry walls, a single sensor can cover a detection area of 1,5 m ray by installing the detector every 3 metres approximately.

Security grading: designed in accordance with Grade 3 (EN 50131)
Environmental classification: designed in accordance with Class II (EN 50131)
Dimensions: 41 x 67 x 27 mm (W x H x D)
Gross weight: 50 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP40
Connections : 2 non-polarized conductors + shield
Colour: white
Detector removal device
Detector opening device
Average coverage area: approx. 9 m²

Het bericht Detector for walls verscheen eerst op Topguard.

Detector for burglar bars

dennis — Wed, 11 Sep 2019 09:50:55 +0000

Piezoceramic shock detector for the protection of burglar bars against break and breakthrough attempts. Designed for outdoor use, the sensor is provided with metal housing and the relevant connection cable is protected by flexible metal tube.

Security grading: designed in accordance with Grade 1 (EN 50131)
Environmental classification: designed in accordance with Class III (EN 50131)
Dimensions: 33 x 100 x 14 mm (W x H x D)
Gross weight: 326 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP55
Connections: 2 non-polarized conductors + shield
Sensor and metal tube colour: steel grey
Metal tube diameter: 10 mm
Metal tube material: galvanized steel with single seam and PVC vacuum
Average coverage area: 4 m²

Het bericht Detector for burglar bars verscheen eerst op Topguard.

Detector for windows and doors

dennis — Wed, 11 Sep 2019 09:46:47 +0000

Piezodynamic shock detector for the protection of doors and windows against shocks and breakthrough attempts. Door, window or skylight frame mounted, its high detection sensitivity enables it to protect the whole door or window, including the glasses. The sensor is equipped with an antiremoval device which signals the removal of the sensor from the structure.

Security grading: designed in accordance with Grade 3 (EN 50131)
Environmental classification: designed in accordance with Class II (EN 50131)
Dimensions: 31 x 51 x 19 mm (W x H x D)
Gross weight: 82 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP55
Connections: 2 non-polarized conductors + shield
Colour: white
Average coverage area:
- 4 m² on tempered glass (single layer) up to 11 mm thick
- 3 m² on reinforced glass (double layer) up to 11 mm thick
- 2 m² on reinforced glass (triple layer) up to 26 mm thick

Het bericht Detector for windows and doors verscheen eerst op Topguard.

Detector with magnet for windows and doors

dennis — Wed, 11 Sep 2019 09:45:42 +0000

Piezodynamic shock detector to protect windows and doors against shocks, opening and breakthrough attempts. Door, window or skylight frame mounted, its high detection capability enables it to protect the whole structure, including glasses. The sensor is equipped with magnetic contact which detects the opening of the structure and with an anti-removal device which signals the attempts of removing the sensor from the protected structure.

• Security grading: Grade 3 (EN 50131)
• Environmental classification: Class II (EN 50131)
• Sensor dimensions: 52 x 31 x 19 mm (W x H x D)
• Magnet dimensions: 42 x 11 x 11 mm (W x H x D)
• Gross weight: 93 g
• Operating temperature: -25 °C ÷ +70 °C
• IP Rating: IP40
• Connections: 2 non-polarized conductors + shield
• Colour: white
• Antiremoval device
• Magnetic contact for opening detection
• Average coverage area: 4 m²

Het bericht Detector with magnet for windows and doors verscheen eerst op Topguard.

Glass-break detector

dennis — Wed, 11 Sep 2019 09:44:12 +0000

Piezoceramic shock sensor to protect glazed surfaces against break, drilling and breakthrough attempts. Easy and quick to install, the sensor is fixed to glass by means of the adhesive tape provided with it.

• Security grading: designed in accordance with Grade 2 (EN 50131)
• Environmental classification: designed in accordance with Class II (EN 50131)
• Dimensions: 27 x 48 x 9 mm (W x H x D)
• Gross weight: 63 g
• Operating temperature: -25 °C ÷ +70 °C
• IP Rating: IP55
• Connections: 2 non-polarized conductors + shield
• Colour: white
• Average coverage area:
– 4 m² on tempered glass (single layer) up to 11 mm thick
– 3 m² on reinforced glass (double layer) up to 11 mm thick
– 2 m² on reinforced glass (triple layer) up to 26 mm thick

Het bericht Glass-break detector verscheen eerst op Topguard.

Rafid

dennis — Mon, 11 Feb 2019 18:29:36 +0000

Rafid uses electromagnetic fields to automatically identify and track intruders attempting to compromise your location. It is discreet and therefore ideal for proximity detection of intruders walking unknowingly into its invisible field.

RAFID uses a dual cable system: one cable transmitting a radio wave, and another cable receiving that wave. Changes to the signal passing between the transmitter cable and receiver cable are analyzed to determine if these changes are caused by an intruder.

Strategically installed transmitters and receivers can cover most company locations with a blanket of radio frequency rays. This gives the security of knowing that you have chosen the most modern equipment available to make your perimeter as intruder-proof as possible.

• An invisible approach alarm system

• Dual cable system detects intruder speed and movement

• Flexible application and customised configuration for most locations

Het bericht Rafid verscheen eerst op Topguard.

Redscan RLS-2020

dennis — Thu, 31 Jan 2019 15:29:25 +0000

The RLS2020 is a laser scan detector that provides accurate motion detection in terms of size, speed and distance of objects within the detection area.

The advantages:

Use inside and outside
High resolution mode (indoor only)
Throw-in (indoor only)
Up to 4 patterns, up to 4 zones per pattern (switching between patterns by input)
DQ output
Anti-rotation, Anti-masking, Pollution, Trouble, Tamper

Polygon mirror (polygon mirror)

The laser beam reflects on the mirrors that rotate with 600 RPM. The beam reflects on the object and returns to the receiver.

Het bericht Redscan RLS-2020 verscheen eerst op Topguard.

Roof detection

dennis — Thu, 31 Jan 2019 15:15:10 +0000

This system is activated due to pressure differences arise when there is one person runs over it. The detection mat consists of one ready made foil that is on it existing roof is laid. This mat is UV resistant and has a lifetime of 30 up to 40 years. Sit in the mat glass fibers. At it will enter the roof change the light spectrum. The analyzer will make this change analyze and an alarm
to generate. The system is called no problems with weather conditions, extreme temperature rises, electromagnetic disturbances and inductive charges caused by lightning strikes.

The moment a person stands on the secured part, followsimmediately an alarm message. This even before the burglar has made damage
on the facade or glazing. In this way the system has a number of important advantages:

Insensitive to external factors such as weather conditions, vegetations, etc.
the system is invisible and therefore difficult to manage sabotage.
Since it is invisible, it gives a particularly beautiful appearance end result.
Easy integration with each alarm, access control or CCTV system.
Maintenance free

Het bericht Roof detection verscheen eerst op Topguard.

Datalog 5

dennis — Wed, 23 Jan 2019 15:52:42 +0000

Datalog 5 is a modular software suite that operates as a single or multi user graphical user interface, providing local and remote site monitoring and control of building, fire, security and energy systems. Datalog assists in reducing risk and cost while maximising efficiency, situation awareness and accountability.

Managing these systems across multiple sites and complex building environments is a significant challenge, particularly monitoring thousands of circuits in the instance of simultaneous events.

Benefits

As a single operating platform with just one database, Datalog eliminates the inefficiencies associated with managing control equipment as individual disparate systems.

* Events at a wide range of remote sites can be monitored and controlled quickly and effectively.

* System warnings, events and alarms are all clearly identified, prioritised, graphically located and visually verified with automatic CCTV video and audio to enable a more efficient and accountable response.

* Datalog provides an audit trail of events which includes a full history database. This can be linked to retrieve audio and video verification for each event

Het bericht Datalog 5 verscheen eerst op Topguard.