Vibration and shock detectors | Topguard

Multi-zone electronic processing board

dennis — Wed, 11 Sep 2019 10:00:13 +0000

Multi-zone processing board to manage all detectors. It processes the signals coming from the detectors and generates alarm states by discriminating them by type of attack: shock (low shocks), breakthrough (gross attacks), drilling (continuous shocks). The processing board is provided with 4 channels: each channel accepts up to 2 sensors of the same type, for a total amount of 8 sensors. 10 solid state NC outputs are available for the connection of the system to a control panel. To enter the configuration and calibration functions of the processing board, you need the DG-DEA-WF Wi-Fi dongle (see page 16) and the relevant service app for mobile devices (Android and iOS).

Dimensions: 130 x 104 x 32 mm (W x H x
Packaging dimensions: 130 x 105 x 40 mm (W x H x D)
Gross weight: 150 g
Power supply: 12 Vdc (+/- 25%)
Current: 250 mA (max – during calibration) 100 mA (standby)
Operating temperature: -25 °C ÷ +70 °C
Inputs: – 4 inputs for A03PRO sensors (2 non polarized conductors + shield for each channel) – 4 RESET inputs (one per channel)
NC relay outputs: – 4 Burglar/Breakthrough alarm outputs (one per channel) – 4 Opening alarm outputs (one per channel) – General tamper – Low battery • Communication port: Wi-Fi Dongle (RJ12)
Management capability: 8 SERIE A03PRO sensors (2 each channel)
Mobile app licence (iOS/ANDROID) included

Het bericht Multi-zone electronic processing board verscheen eerst op Topguard.

Detector for walls

dennis — Wed, 11 Sep 2019 09:53:42 +0000

Piezodynamic shock sensor for the protection of walls against breakthrough and drilling. On masonry walls, a single sensor can cover a detection area of 1,5 m ray by installing the detector every 3 metres approximately.

Security grading: designed in accordance with Grade 3 (EN 50131)
Environmental classification: designed in accordance with Class II (EN 50131)
Dimensions: 41 x 67 x 27 mm (W x H x D)
Gross weight: 50 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP40
Connections : 2 non-polarized conductors + shield
Colour: white
Detector removal device
Detector opening device
Average coverage area: approx. 9 m²

Het bericht Detector for walls verscheen eerst op Topguard.

Detector for burglar bars

dennis — Wed, 11 Sep 2019 09:50:55 +0000

Piezoceramic shock detector for the protection of burglar bars against break and breakthrough attempts. Designed for outdoor use, the sensor is provided with metal housing and the relevant connection cable is protected by flexible metal tube.

Security grading: designed in accordance with Grade 1 (EN 50131)
Environmental classification: designed in accordance with Class III (EN 50131)
Dimensions: 33 x 100 x 14 mm (W x H x D)
Gross weight: 326 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP55
Connections: 2 non-polarized conductors + shield
Sensor and metal tube colour: steel grey
Metal tube diameter: 10 mm
Metal tube material: galvanized steel with single seam and PVC vacuum
Average coverage area: 4 m²

Het bericht Detector for burglar bars verscheen eerst op Topguard.

Detector for windows and doors

dennis — Wed, 11 Sep 2019 09:46:47 +0000

Piezodynamic shock detector for the protection of doors and windows against shocks and breakthrough attempts. Door, window or skylight frame mounted, its high detection sensitivity enables it to protect the whole door or window, including the glasses. The sensor is equipped with an antiremoval device which signals the removal of the sensor from the structure.

Security grading: designed in accordance with Grade 3 (EN 50131)
Environmental classification: designed in accordance with Class II (EN 50131)
Dimensions: 31 x 51 x 19 mm (W x H x D)
Gross weight: 82 g
Operating temperature: -25 °C ÷ +70 °C
IP Rating: IP55
Connections: 2 non-polarized conductors + shield
Colour: white
Average coverage area:
- 4 m² on tempered glass (single layer) up to 11 mm thick
- 3 m² on reinforced glass (double layer) up to 11 mm thick
- 2 m² on reinforced glass (triple layer) up to 26 mm thick

Het bericht Detector for windows and doors verscheen eerst op Topguard.

Detector with magnet for windows and doors

dennis — Wed, 11 Sep 2019 09:45:42 +0000

Piezodynamic shock detector to protect windows and doors against shocks, opening and breakthrough attempts. Door, window or skylight frame mounted, its high detection capability enables it to protect the whole structure, including glasses. The sensor is equipped with magnetic contact which detects the opening of the structure and with an anti-removal device which signals the attempts of removing the sensor from the protected structure.

• Security grading: Grade 3 (EN 50131)
• Environmental classification: Class II (EN 50131)
• Sensor dimensions: 52 x 31 x 19 mm (W x H x D)
• Magnet dimensions: 42 x 11 x 11 mm (W x H x D)
• Gross weight: 93 g
• Operating temperature: -25 °C ÷ +70 °C
• IP Rating: IP40
• Connections: 2 non-polarized conductors + shield
• Colour: white
• Antiremoval device
• Magnetic contact for opening detection
• Average coverage area: 4 m²

Het bericht Detector with magnet for windows and doors verscheen eerst op Topguard.

Glass-break detector

dennis — Wed, 11 Sep 2019 09:44:12 +0000

Piezoceramic shock sensor to protect glazed surfaces against break, drilling and breakthrough attempts. Easy and quick to install, the sensor is fixed to glass by means of the adhesive tape provided with it.

• Security grading: designed in accordance with Grade 2 (EN 50131)
• Environmental classification: designed in accordance with Class II (EN 50131)
• Dimensions: 27 x 48 x 9 mm (W x H x D)
• Gross weight: 63 g
• Operating temperature: -25 °C ÷ +70 °C
• IP Rating: IP55
• Connections: 2 non-polarized conductors + shield
• Colour: white
• Average coverage area:
– 4 m² on tempered glass (single layer) up to 11 mm thick
– 3 m² on reinforced glass (double layer) up to 11 mm thick
– 2 m² on reinforced glass (triple layer) up to 26 mm thick

Het bericht Glass-break detector verscheen eerst op Topguard.